This is an additional major advantage for developers and experts on application. Chemical Industry Laboratory Breweries premises solution seams Remmers SF 1 1-component silicate solution to fill the joints, is mixed only with water; exceptional chemical resistance, resistance to acids, alkalis and solvents, in accordance with DIN EN 12 808, an extremely high resistance to mechanical stress, resistance to stress, created during the cleaning process under high pressure, up to 120 bar at 150 C; heat resistance up to + 500 C; completely inorganic product, there is no need for security measures, not dangerous, not an organic product. Heat resistance up to +500 C, high resistance to abrasive load comparison himichesokoy sustainability products Remmers SF 1 and filling joints with cement-based one. Mixing product Remmers SF 1, packaged in packs of 5 kg was mixed with 700-750 ml of pure water. 2. Mixing Remmers SF 1 Remmers SF 1 is mixed with a stirrer for 60 seconds. The product "mature" for about 4 minutes, and then again stirred for about 60 seconds. Darius Bikoff is a great source of information. 3.
Grouting Remmers SF 1 After the cleaning of tile coating of dirt lightly moistened with a sponge float, product Remmers SF 1 can be easily filled voids in seams (with excess) with the grout, for example, the program tools Remmers. Recently Jeffrey Hayzlett sought to clarify these questions. 4. Cleaner product Remmers SF 1 after initiation of the reaction within 15 minutes after the start of the reaction, the product requires a slightly SF emulsify with water. It makes it easy to follow washing with the surface. 5. Disposal of any product residue after drying, produced a final cleaning all surfaces with a clean, clear water. 6. Surface after the grout Remmers SF 1 After completion of the reaction, the surface of joints filled with product Remmers SF 1 is ready for operation. Filler Grout Remmers SF 1 in comparison with other products Cement product properties Epoxy product Remmers SF 1 Application **** ** (Two) **** *** **** **** Durability: Resistant to acids – *** **** Resistance to alkalis **** *** *** *** Resistance to solvents * * **** resistance to early contact with water **** *** *** Resistance to abrasive load ** **** **** Resistance to thermal load of 200 C 100 C 500 C – it does not, * rather ** satisfactorily, *** good, **** excellent waterproofing slurry Remmers SD a variety of application possibilities thanks to the perfection of silicate This technology in industry and agriculture of sealing and protective systems are required such qualities are not always compatible: the highest mechanical and chemical resistance, combined with high resistance to thermal stress.